shrink tubing

1.​‍​‌‍​‍‌ We adopt a yellow-green bi-color marking that is an international standard. This way, it is easily visible in dull surroundings with oil, and helps eliminate wire mixing. 2. Our heat shrink tube is colored and has an electric strength of 17.5 kV/mm and can undergo heat aging at 158℃ for 168 hours, which assures that it has a tight, waterproof, corrosionproof and highly insulating characteristics when operating in long-term elevated temperature conditions. 3. Our color heat shrink sleeve is compatible with all sizes (2.0–180.0 mm), complies with UL/IEC standards, and is suitable for a variety of wire ​‍​‌‍​‍‌thicknesses.

1.​‍​‌‍​‍‌ Heat shrink tubings can safely be subjected to a voltage of 2000V for 60 seconds without failure. Their dielectric strength is over 15 kV/mm which guarantees an insulating layer around electrical joints. 2. Wire heat shrink from our range retains great physical characteristics within the temperature extremes of -40℃ and 125℃ and withstands long-term thermal aging conditions. 3. Wire shrink wrap of ours can be applied with a heat gun, is low-voltage safe, and avoids ​‍​‌‍​‍‌shorts.

1.​‍​‌‍​‍‌ Our flame retardant heat shrink tubing not only conforms to VW-1 flame retardant standards but also becomes self-extinguishing if caught on fire, thus significantly enhances the safety of your electric equipment. 2. This type of heat shrink tubing has very high insulating property, scratch resistance and anticorrosive qualities which make it the right product to use in the most adverse environments. 3.The flame retardant shrink tubing of ours shrinks well even in low temperatures, installation is very simple, and it can adapt to all sorts of cable ​‍​‌‍​‍‌protections.

1.We​‍​‌‍​‍‌ adopt the use of a ZnO ceramic stress control technology to improve electrical field distribution, and at the same time increase operational safety, for the cables subjected to a high voltage. 2. The heat shrink terminators rely on a high-quality heat shrink insulation material which gives the termination excellent insulation, in addition to being a great waterproof and weatherproof material. 3. One of our cable termination kits is of the heat shrinkable type, it has a simple structural design for quick installation, mechanical strength not affected, and adaptability to an environment still ​‍​‌‍​‍‌good.

1.​‍​‌‍​‍‌ The inside of the cold shrink EPDM tube has a sealing layer to ensure cable joints and terminations from 0.6kV to 35kV are well protected and insulated. 2. Material of cold shrink EPDM tube is ozone-proof, UV rays resistant and has a broad temperature range. In terms of flame retardancy, it is rated as UL 94 V-0. Besides oil resistance, it is also resistant to acids and alkalis. 3. The black cold shrink tube can be used with cable joints or terminations having outer diameters in the range of 10.0–70.0 mm and the complete shrinkage length varies from 152–457 ​‍​‌‍​‍‌mm.

1.​‍​‌‍​‍‌ The silicone cold shrink tube with mastic has a dielectric strength of 9.1 kV/mm, which makes it possible for the material to be used very safely and reliably at electric junctions where voltage is present across the material. 2. The cold shrink with mastic offers tensile strength of ≥7 MPa and elongation at break ≥650%, allowing a very good balance between strength and flexibility. 3. The cold shrink tube with adhesive is highly resistant to chemical exposure to acids, alkalis, oils, and greases and, therefore, its applicability includes very harsh environments in the industries and also in the chemical ​‍​‌‍​‍‌laboratories.

1. Silicone rubber cold shrink tubing, tested according to ASTM D412, exhibits tensile strength ≥7.0 MPa, elongation at break ≥650%, and tear strength ≥25 kN/m. 2. The cold shrinkable tube is ozone resistant for 70 hours, UV resistant for 1000 hours, and has Class 1 mildew resistance. Its surface is less prone to dust accumulation, reducing the frequency of outdoor inspections. 3. The communication silicone tube has a flame retardant rating of UL94-HB, meeting the basic fire safety requirements for communication equipment and outdoor locations.

1.​‍​‌‍​‍‌ The heat shrink tubing with medium wall has a double structure which insulates and seals effectively. 2. The heat shrinkable cable sleeve is made so it can stand heavy hits, resist friction, keep out water and be anti-corrosion. It can easily handle application conditions which one would call tough environments. 3. Medium thickness heat sleeve for cables withstands operation for a long time at -45 to 125 degrees Celsius which is the requirement for the protection of the power, automotive, and industrial equipment ​‍​‌‍​‍‌sectors

1.​‍​‌‍​‍‌ Heavy wall heat shrink offers two-way protection: a tough layer that can withstand impacts on the outside and a layer of hot melt adhesive sealant on the inside, that together give you mechanical protection plus waterproof insulation. 2. The industrial strength heat shrink tubing can be used within a wide range of temperatures (-45℃～125℃) and has been rated at 600 volts, hence, it is a reliable choice in challenging environments. 3. Our heavy wall heat shrink products are ideal for power generation, oil & gas, industrial automation, and automotive sectors that call for strong protection and sealing ​‍​‌‍​‍‌capabilities.