heat shrink tubing

1.​‍​‌‍​‍‌ We adopt a yellow-green bi-color marking that is an international standard. This way, it is easily visible in dull surroundings with oil, and helps eliminate wire mixing. 2. Our heat shrink tube is colored and has an electric strength of 17.5 kV/mm and can undergo heat aging at 158℃ for 168 hours, which assures that it has a tight, waterproof, corrosionproof and highly insulating characteristics when operating in long-term elevated temperature conditions. 3. Our color heat shrink sleeve is compatible with all sizes (2.0–180.0 mm), complies with UL/IEC standards, and is suitable for a variety of wire ​‍​‌‍​‍‌thicknesses.

1.​‍​‌‍​‍‌ Heat shrink tubings can safely be subjected to a voltage of 2000V for 60 seconds without failure. Their dielectric strength is over 15 kV/mm which guarantees an insulating layer around electrical joints. 2. Wire heat shrink from our range retains great physical characteristics within the temperature extremes of -40℃ and 125℃ and withstands long-term thermal aging conditions. 3. Wire shrink wrap of ours can be applied with a heat gun, is low-voltage safe, and avoids ​‍​‌‍​‍‌shorts.

1.​‍​‌‍​‍‌ Our flame retardant heat shrink tubing not only conforms to VW-1 flame retardant standards but also becomes self-extinguishing if caught on fire, thus significantly enhances the safety of your electric equipment. 2. This type of heat shrink tubing has very high insulating property, scratch resistance and anticorrosive qualities which make it the right product to use in the most adverse environments. 3.The flame retardant shrink tubing of ours shrinks well even in low temperatures, installation is very simple, and it can adapt to all sorts of cable ​‍​‌‍​‍‌protections.

1.We​‍​‌‍​‍‌ adopt the use of a ZnO ceramic stress control technology to improve electrical field distribution, and at the same time increase operational safety, for the cables subjected to a high voltage. 2. The heat shrink terminators rely on a high-quality heat shrink insulation material which gives the termination excellent insulation, in addition to being a great waterproof and weatherproof material. 3. One of our cable termination kits is of the heat shrinkable type, it has a simple structural design for quick installation, mechanical strength not affected, and adaptability to an environment still ​‍​‌‍​‍‌good.

1.​‍​‌‍​‍‌ The heat shrink tubing with medium wall has a double structure which insulates and seals effectively. 2. The heat shrinkable cable sleeve is made so it can stand heavy hits, resist friction, keep out water and be anti-corrosion. It can easily handle application conditions which one would call tough environments. 3. Medium thickness heat sleeve for cables withstands operation for a long time at -45 to 125 degrees Celsius which is the requirement for the protection of the power, automotive, and industrial equipment ​‍​‌‍​‍‌sectors

1.​‍​‌‍​‍‌ Heavy wall heat shrink offers two-way protection: a tough layer that can withstand impacts on the outside and a layer of hot melt adhesive sealant on the inside, that together give you mechanical protection plus waterproof insulation. 2. The industrial strength heat shrink tubing can be used within a wide range of temperatures (-45℃～125℃) and has been rated at 600 volts, hence, it is a reliable choice in challenging environments. 3. Our heavy wall heat shrink products are ideal for power generation, oil & gas, industrial automation, and automotive sectors that call for strong protection and sealing ​‍​‌‍​‍‌capabilities.

1.​‍​‌‍​‍‌ Tensile strength in our semi-conductive heat shrink tube is ≥13MPa and elongation at break is ≥300% which allows it to withstand impact and still have great flexibility. 2. The semi-conductive heat shrink tube becomes smaller at 90℃and completely shapes at 130℃, making it perfect cover for cable joints as it wraps around them with great tightness and efficiency. 3. Our heat shrink semi-conductive pipe stops moisture from getting in which is important to maintain cable joint reliability, especially for those placed in humid places and salt-spray areas for a long ​‍​‌‍​‍‌time.